Zinc Metric Drop-In Anchors are a low profile, female threaded anchor suitable for use with machine bolts of any length or with threaded rod.
The anchor is set by using a special punch to drive the captive expansion plug fully home. Correct expansion is assured for maximum holding power every time.
Please see table below for grip range, drill size and hole depth.
|Drilling and Fixing Information for Drop In Anchor - Metric - Zinc Yellow|
|Size||Drill Size (mm)||Min. Hole Depth (mm)|
|M6 X 25||8||27|
|M8 X 30||10||32|
|M10 X 40||12||42|
|M12 X 50||15||52|
|M16 X 65||20||67|
|M20 X 80||25||82|